Hangzhou Songjing Electric Co. Ltd.

Your Position:	Home Page >> Product Show
	Product Show→Ultrasonic Humidifier

SJ-201E

Dehumidifier with Temperature Adjustment

Electricity-specific humidifiers

Pipeline-type dehumidifiers

Ceiling dehumidifier/wall-hanging dehumidifier

■According to different spray rates, ZS series ultrasonic industrial humidifier has single output PVC interface (that is, 3 KG) and double output PVC interface (that is, 6 KG, 9 KG and 12 KG).

Note: PVC interface is at the top of the equipment.

■ZS series ultrasonic industrial humidifier has traveling wheel design, (exterior wall hanging type can be tailored). The whole equipment adopts stainless steel case and surface treatment of sprayed plastics. It is convenient to install the handsome and practical outline. ZS series ultrasonic industrial humidifier is equipped with standard water inlet, drain cock and overflow gap. Water inlet supplies water, and control the water level automatically.

Technical parameters of ultrasonic industrial humidifier

Name	Spray rate	Air volume	Spraying mode	Supply voltage	Fusing current	Control mode	Power	Diameter	Net weight	Overall dimensions
Type	Kg/h	M3/h	MM	V/Hz	A		V	μm	Kg	CM
ZS-10Z	≥3	170	110PVC	220/50	5	Humidity control	300	≤10	39	65X46X61
ZS-20Z	≥6	300	110PVC	220/50	10	Humidity control	600	≤10	42	65X46X61
ZS-30Z	≥9	480	2X110PVC	220/50	15	Humidity control	900	≤10	53	80X46X61
ZS-40Z	≥12	610	2X110PVC	220/50	20	Humidity control	1200	≤10	57	80X46X61

Applicable cubage of ultrasonic industrial humidifier

Humidity range

ZS-10Z	ZS-20Z	ZS-30Z	ZS-40Z
Volume(m3)	Volume(m3)	Volume(m3)	Volume(m3)

≤50%RH	≥600	≥1200	≥1800	≥2400
55-65%RH	450	900	1350	1800
65-75%RH	360	720	1080	1440
75-85%RH	280	560	840	1120
85-95%RH	200	400	600	800
≥95%RH	100-160	200-320	300-450	400-600

■Control mode of ZS series ultrasonic industrial humidifier:

ZS series ultrasonic industrial humidifier is automatically controlled by digital humidity controller (with “Z” after the model). Digital humidity controller can be randomly set from 1% RH to 99% RH, and its control precision reaches ±5% RH. Within the set value, the equipment works automatically without personnel attendance. Output pipeline of SJ series ultrasonic industrial humidifier is arranged reasonably according to clients’ humidifying places; spray nozzles are distributed evenly, and joints between pipelines should be sealed. The interior of SJ series ultrasonic industrial humidifier consists of integrated spray components and dry-run protection device. Uniform spray particles are only 1- 10μm in diameter, and suspend in the air for a long time. When SJ series ultrasonic industrial humidifier is spraying, there is no mechanical drive, noise disturbance or pollution. Spraying efficiency is high, failure rate is low, and energy consumption is low. Therefore, this is an efficient, reliable and practical ultrasonic industrial humidifier.

■ZS series ultrasonic industrial humidifier with Φ110 mm PVC standard pipeline is widely used in following industries.:

1. Textile industry; 2. Paper mill industry; 3. Computer rooms; 4. Electronic industry; 5. Spray coating industry; 6. Plastics industry; 7. Gun powder industry; 8. Printing industry; 9. Laboratory; 10. Tobacco industry; 11. Heating ventilation industry; 12. Preservation and storage; 13. Food industry; 14. Planting industry; 15. Breeding industry; 16. Artificial landscape